Getting Started with Assessment Validation: How to Validate Assessments

Getting Started with Assessment Validation: How to Validate Assessments

Blog Article

With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.

We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.

The standards necessitate conducting two types of validation.

The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.

The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.

It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.

Defining the Two Types of Assessment Validation

Breaking Down Assessment Validation

As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.

Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

The Process of Assessment Tool Validation

Having distinguished between the two types of validation, let’s dive into the details of assessment tool validation.

Ideal Times to Conduct Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Therefore, any time you obtain new learning resources, assessment tool validation should be completed before students use them.

There's no necessity to wait for the next 5-year cycle validation schedule. Validate new resources immediately to ensure they are appropriate for student use.

Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:

- resources are updated
- adding new training products on scope
- course gets reviewed against training product updates
- learning resources are identified as a risk during your risk assessment

ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.

What Training Products Should Be Validated?

Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.

Key Resources for Assessment Tool Validation

Study Resources

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.

Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Team for Validation

Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.

Your validation panel must, as a group, possess:

Relevant vocational competencies and up-to-date industry skills for the unit being validated

Current knowledge and expertise in vocational teaching and learning

Either one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the successor version

Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.

Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Requires Checking?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Essential Principles of Assessment
Fairness – Does the assessment process ensure equal opportunity and access for everyone?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?

Evidence Rules

Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and modern industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Be Consistent with Your Teachings

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Perform each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:

change diapers

bottle preparation, feeding infants from bottles, and cleaning equipment

solid food preparation and feeding babies

respond to baby signs and cues suitably

prepare and settle infants for sleep

monitor and support age-appropriate physical exploration and gross motor skills

Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Keep an Eye on Plurals!
Pay attention get more info to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

Complete or Not Competent

Pay attention to lists. Again, as illustrated above, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be Clearer

Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What types of information can be included in a work package?

Answers can include:

Needed materials

Appropriate costs

Length of activities

Designated duties and responsibilities

If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolation, engineering controls

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolating, engineering, administration

Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.